Adhesives and sealants
Sealants
-
Two-component polymer cement sealant for joints with high elasticity and good adhesion, designed to seal expansion joints and joints in concrete, b... -
Cold-cured two-component polysulfide sealant with a low modulus of elasticity for joints subject to aggressive chemical exposure.
-
Polyurethane-based thixotropic sealant for joints and seams
-
Polyurethane-based thixotropic sealant for joints and seams
-
Two-component sealant based on polyurethane, has high resistance to aggressive media (acids, alkalis, solvents, industrial detergents, etc.)... -
One-component, water-swellable sealant
-
Three-component polyurethane composition for filling road joints
-
Single-component paste-like mastic for areal waterproofing and protection based on a silyl-modified polymer, which, curing under wet conditions, fo... -
Single-component, paste-like adhesive and sealing mastic based on a silyl-modified polymer that, when polymerized in wet conditions, forms an elast... -
One-component paste-based sealant based on polyolefins, designed to seal the elements of the input communications (pipes, cables, etc.), ca...
The bulking-up profiles (cords)
-
Profile of hidrophilic rubber, which is designed to seal cold and structural joints and joints.
Perforated injection hoses
-
The system for sealing concreting joints in new construction, consists of a perforated flexible hose, injection packers, high pressure hoses, faste... -
The system for sealing concreting joints in new construction. -
Perforated flexible hose with fabric braid that protects it from concrete mix during concreting. -
Flexible perforated hose for concreting joints. -
High pressure hose for supplying injection formulations in the Injpipe system. -
High pressure hose for supplying injection formulations in the Injpipe system. -
Plastic anchor for fixing the hoses Injpipe (T). -
Plastic hoses connector in the Injpipe (T) injection system. -
Rubber protective cap for hoses in the system Injpipe (T). -
Head for the feed packer in the injection system Injpipe (T). -
Plastic feed packer for the Injpipe (T) with a protective cap on the thread M8. -
The system for sealing of joints concreting at new construction, consists of the flexible punched hose, injection packers, hoses of high pressure, ...
Elastic tapes and tabs
-
Three-layer elastic waterproofing tape for the device of movement joints with outer layers of polypropylene non-woven cloth, inner - of thermoplast... -
Homogeneous tape based on thermoplastic elastomer for waterproofing joints, joints and cracks in building structures subjected to dynamic loads and... -
Compression seals in the form of square sections of EPDM rubber for sealing deformation and technological joints. Installation of Vitrajoint...
Auxiliary materials
-
Primer composition for sealants based on polyurethane.